Brewing – Thermaflo https://www.thermaflo.co.nz Liquid Food Process Systems Tue, 21 Feb 2023 02:25:15 +0000 en-NZ hourly 1 https://wordpress.org/?v=6.8.2 https://www.thermaflo.co.nz/wp-content/uploads/2022/04/cropped-TF-Icon-32x32.png Brewing – Thermaflo https://www.thermaflo.co.nz 32 32 BeerMAX Reverse Osmosis De-alcoholisation System https://www.thermaflo.co.nz/equipment/beermax-reverse-osmosis-de-alcoholisation-system/ Mon, 20 Feb 2023 23:35:16 +0000 https://www.thermaflo.co.nz/?post_type=product&p=11414 Capacity: 10 - 100hL / day (dependent on model) Membrane Technology: Reverse Osmosis 8038 Membrane Area: 60 - 120m² (dependent on model) Operating pressure: 25-40 bar Working temperature: 5 - 10°C Footprint: 2400 x 1000 x 2000 mm (L x W x H)  ]]> The  BeerMax is a Reverse Osmosis De-alcoholisation System for alcohol reduction in beer, wine and cider beverages.

Batches of 10 – 100 hectoliters of beer per day can be treated, and this can be done from an existing full-strength brew. Because of its low operating temperature and tight RO membranes, the BeerMAX is excellent at removing water and alcohol while retaining the larger molecules that make up aroma and flavour.

An automated CIP cleaning cycle comes standard, so it is very easy to clean.

An ideal unit for small and medium-sized breweries.

The technology is proven and operating in Germany and the UK. RO Systems are processing a variety of beers including lagers, IPA’s, Wheat beers etc. Hazy’s and high-gravity beers can also be processed without difficulty.

]]> ArtBREW Craft Beer Clarifier https://www.thermaflo.co.nz/equipment/artbrew/ Tue, 31 Aug 2021 01:58:18 +0000 https://thermaflowp.icepick.co.nz/?post_type=product&p=5287 Model Beer clarification capacity (hl/hr) Clarification of dry hopping beer (hl/hr) Clarification of beer with addition of tank bottom** (hl/hr)  Installation weight (Kg) Skid footprint (MxM) Total installed powerkW (HP) ArtBREW 31 up to 50 6-25 15 750 2.0 x 1.0 5.5 (7.5) ArtBREW 41 up to 75 12-35 33 1,200 1.6 x 1.7 11 (15) ArtBREW 71 up to 150 25-75 68 1,500 1.9 x 2.0 15 (20) ArtBREW 131 up to 250 40-130 125 2,300 3.0 x 1.7 22 (30) ArtBREW 201 up to 350 70-180 160 2,600 3.0 x 1.7 37 (50) ArtBREW 301*** up to 600 90-300 220 3,400 2.2 x 1.9 45 (60) ArtBREW 401*** up to 700 100-350 250 3,700 2.3 x 2.1 55 (75)  ]]> ArtBREW, the craft beer clarifier from Frautech, is a high-quality simple-to-operate, plug-and-play beer clarification solution for your brewery. Combining efficiency and ease of maintenance, ArtBREW is the right ingredient for your success in the craft brewing industry.

 

Why use a clarifier for your brewery?

  • Reduced Oxygen Pickup – The KO₂ system reduces oxygen pick-up.
  • Higher yields per tank – Up to 10% higher yields compared to traditional filtration and settling methods.
  • Faster Tank Turnaround – Reduced processing times when compared to traditional filtration and settling methods.
  • Spend Less On Consumables – The consumption of filter aids is minimized or eliminated, and your filter shelf life is extended.
  • Low total cost of ownership – you’ll save energy with the variable speed belt drive, and the low cost of spare parts and ease of maintenance.
  • Very short return on investment – Typically less than 24 months.
]]> Tanks & Vessels https://www.thermaflo.co.nz/equipment/tanks-vessels/ Tue, 03 Aug 2021 00:13:10 +0000 https://thermaflowp.icepick.co.nz/?post_type=product&p=813 Tank Options: Mixing, blending, Incubation, Storage, Aseptic, Process, CIP, single, double or triple skinned tank with dimple pad and/or insulation. Capacity:  Any –  size and volume specifically designed to suit the project's requirements Material: All fabricated in the correct Stainless Steel grade to suit that specific tanks application  ]]> All tanks & vessels that we fabricate are always designed with the end clients process in mind. We have the ability to produce any kind of tank from, mixing, incubation, storage, aseptic, CIP and whole range of additional tanks and vessels.

Starting with the required volume and dimensions of your required vessel, and its purpose our design team will determine if you will require a single, double or triple skinned tank with dimple pad and/or insulation.

From there, we’ll work with you to determine the placement of the vessel on-site, where the on the tank a manway may be required, the positioning of inlet and outlet piping for both the product and CIP as well as all associated valving that may be included.

Once the above information has been gathered, we will complete fabrication in our workshop before sending the tank to site for installation. As we take installation into account from the beginning of the design process, we know the anchoring points for the tank and where all associated piping will be going, considerably speeding up all on-site works.

Whether you’re looking for a straightforward tank design or something more customised, our team can help.

]]>