0 Items
Select Page

Palletisers

Model: 740 Series

Sweep Palletiser
Speed: up to 3 layers per minute, depending on laser pattern
Control system: PLC
Electrical connection: 4l 5/400 V, 50Hz, 3 phase
Products handled: cases, trays, cartons etc., up to 400 mm high
Maximum loading height: 2400mm incl. pallet

Gantry Robot Palletiser
Maximum item weight: 25kg (depends on the item type and quality, the lifting method used, speed etc.)
Capacity: up to 12 cycles per minute (depending on the pallet pattern, the size, weight and quality of the items)
Control system: S7-300 Siemens PLC
Electrical connection: 4l 5/400 V, 50Hz, 3 phase – 25 Amp supply required
Air consumption: at 6 Bar up to 350 Nl/min
Loading height (incl. pallet): up to 2100mm with vacuum head
Pallet sizes: all common sizes
Typical products handled: cases, shrink wrapped trays, cartons

 

Description

Sweep palletiser & gantry robot palletiser

A modular designed palletiser that can be adapted for both semi or fully automatic operation. The loading height can be at a high or low level to allow connection to any existing conveyors.

Packs are collated on an infeed conveyor, row by row, before being transferred to the loading plate by a pneumatic pusher. When a layer is complete, the loading plate seeks the correct level and moves out above the pallet for adjustment to the correct level. Two sweeper arms, one above and one below the loading plate, fix the new layer as well as the previous load, the loading plate then retracts. All movements of the loading table are motor-driven.

The palletiser can be equipped with a pallet magazine and pallet outfeed conveyors. The machine is easy to fit into an existing factory layout as the pallet magazine, infeed and outfeed conveyors can be placed in several different positions.

Gantry palletiser

The machine can be fitted with different types of lifting tools including vacuum suction cups, grip/clamp and or lifting plates and most products can therefore be handled.

The gantry robot is flexible and can be equipped with automatic pallet handling. In addition to this, the machine is easy to fit into an existing factory layout as the pallet magazine and Infeed/Outfeed conveyors can be placed in several different positions.

 

Additional information

Features & Benefits

Modular design – the machine is easy to fit to floor-space at your production facility, Quick and safe changeovers, Semi or fully automatic operation, Suitable for: cases – shrink wrapped trays – trays and cartons